Mazda Mazda3

Car details navigation

Mazda3 i-stop

Road Test

Mazda Mazda3 i-stop

Driven August 2009

Additional Info

Time for some science for piston heads. When this Mazda 3’s engine is stopped, the car’s new i-stop system – the company’s first crack at stop/start – knows which piston is in the best position to restart quickest. It’s the one in the combustion stroke phase, where air and fuel are in the cylinder and ready to be ignited. Sensors pinpoint which cylinder that is, before the mixture is sparked and ignited, forcing that piston down first and firing the engine into life faster. It’s like placing bike pedals just past noon, making it easier to push down and move off. You might think that’s the most pointless factoid ever, but Mazda is justifiably quite proud of that kind of detail. And it makes a difference. When you press the clutch, the engine takes just 0.35 seconds to get going. By comparison, BMW’s stop-starters take 0.7secs, because the starter motor has to churn the engine in a conventional fashion. If you’re first at the lights and you’re determined to use your stop/start, that speck of time is significant. The problem is keeping it stopped. If you want to run the aircon or wipers or de-misters, it’ll only switch off for a few seconds or sometimes not at all. Despite having a second battery to run the starter motor, i-stop is reluctant to do its thing unless you switch everything off. We tested the car in 25° heat, selecting a 20° cabin temp, and it could only manage about four seconds before calling on the engine again. That’s not good enough in less-than-strenuous conditions, but it’s a problem we’ve experienced with other makes of car. And then there’s the engine itself: a naturally aspirated 2.0-litre with direct-injection. Not the obvious choice for a stop/start system, which would usually be fitted to a diesel or smaller petrol. Trouble is, i-stop works most efficiently with a direct-injection engine (because less fuel is wasted in the restart process), and Mazda only has two of those on its books – this one, and the 2.3-litre from the CX7. Diesel is incompatible with i-stop in its current state, due to a lack of spark ignition and an extra phase to its combustion cycle. The 2.0-litre manages 41.5mpg and 159g/km – not bad, but it doesn’t feel substantial enough (consider that a BMW 120i with a conventional stop/start system hits 44.1mpg). Yes, it’s an interesting system, and the speed of the restart is impressive, but i-stop doesn’t quite make sense with this engine. Mazda is working on a solution to that diesel problem and is designing some smaller direct-injection engines too. Only when that happens, and when it works better with the air-conditioning, will i-stop really start to shine. Dan Read

Now share it...

Latest road tests

8/10 Mazda Mazda3 Fastback Driven
July 2014
7/10 Mazda Mazda3 SkyActiv D
November 2013
5/10 Mazda Mazda3 2.0 Sport i-stop
July 2009
7/10 Mazda Mazda3 2.2 MZR-CD
January 2009

What do you think?

This service is provided by Disqus and is subject to their privacy policy and terms of use. Please read Top Gear's code of conduct (link below) before posting.

Search Mazda Mazda3 for sale