You are here

This is Bentley’s finished Pikes Peak Bentayga racer

One-off 600bhp luxury SUV is ready to go really quickly up a scary mountain

Read more on:

Bentley has finished work on its Pikes Peak car. Pikes Peak is a scary mountain climb that happens once a year and tests drivers’ nerves and skill. Bentley’s Pikes Peak car is… a massive, 600bhp Bentayga SUV.

Yup, the Crewe carmaker is gunning for an outright ‘production SUV’ record at Pikes Peak this year, and has tricked out one very special Bentayga.

So the drivetrain remains unchanged: 6.0-litre, W12-engine, 664lb ft and – in road-going trim – the ability to hit 62mph in 4.0secs. It’ll also max out at 187mph. Plus there’s the usual gamut of 48V electric anti-roll control and adaptive air suspension.

Bentley has stripped around 300kg of interior trim for this run (it’s allowed, don’t worry), though staggeringly, it remains a two-tonne plus car. There’s a roll cage, fire extinguisher and racing seat, special Pirelli tyres and an Akrapovic exhaust system. Presumably to please the onlookers.

Rhys Millen is the man charged with taking the Bentayga up the mountain, and according to calculations he must average 60mph the entire way to beat the target.

“The course is one you can only attack with a car that can gain and lose sped very quickly, because it’s so tight and twisty,” Mr Millen says. “The combination of 600bhp, 664lb ft and carbon ceramic brakes means that the Bentayga can accelerate and decelerate incredibly hard – and that’s what I’ll be counting on for my run.”

The attempt at Pikes Peak – 12.42 miles, 156 corners, 4,720ft in the air – will take place this coming weekend. Watch this space…

Share this page: 

What do you think?

This service is provided by Disqus and is subject to their privacy policy and terms of use. Please read Top Gear’s code of conduct (link below) before posting.

Promoted content