Advertisement
BBC TopGear
BBC TopGear
Advertisement feature
WELCOME TO HYUNDAI’S HAPPINESS MACHINE
View the latest news
Supercars

Gaze in wonder inside the workshops of GTO Engineering

Fancy a behind-the-scenes wander around the classic Ferrari fettlers' HQ?

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

    Photography: Mark Riccioni

    Advertisement - Page continues below
  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

    Advertisement - Page continues below
  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

    Advertisement - Page continues below
  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

    Advertisement - Page continues below
  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

  • If you’d like a classic Ferrari repairing, servicing, restoring, or even inspecting with an expert eye before you make a difficult-to-explain-to-your-accountant bid at an auction, say, you could do a lot worse than give the folks at GTO Engineering a call. They’ve been fettling Ferraris since the early 1980s, and specialise in Modenese metal of the 1950s, 1960s, and 1970s. 

    Whether you need a competition-spec Colombo V12 building for a race meeting, or merely a fluid top-up on your 812 Superfast, the independent Ferrari fanatics based just outside Henley-on-Thames will have forgotten more about prancing horses before breakfast than you’ll remember in a lifetime. 

    TopGear.com recently popped down to GTO’s workshop to drive its rather spiffing £850,000 Ferrari 250 SWB ‘Revival’, a fully rebuilt recreation of the iconic 1960 Berlinetta based on a period donor car but boasting a completely rebuilt drivetrain, chassis and interior. It’s all of the classic Ferrari passion and soul, without the tiresome business of waiting for a ‘real one’ to come up for sale. Or to stop breaking down. 

    But while the car was being warmed up, GTO Engineering’s founder Mark Lyon allowed us to take a wander around the company’s chassis and engine workshops, through its cavernous storerooms, and even ogle the smorgasbord of customer Ferraris awaiting some made-to-order attention. Normally, hanging around a garage waiting to be served involves dodgy coffee and the smell of old tyres and bad air fresheners. Not here, though. Here, it’s like you’ve died and gone to Fandango heaven.

    So, if Ferrari’s recent Formula One woes have got you down in the dumps about Maranello’s finest, grab a suitably Italian coffee and take a stroll through these rather delicious images. When it comes to Ferraris, they don’t make ‘em like they used to – these ones are even better. 

    (And yes, that is a miniature Ferrari F1 car-style go-kart in the front room).

More from Top Gear

Loading
See more on Ferrari

Subscribe to the Top Gear Newsletter

Get all the latest news, reviews and exclusives, direct to your inbox.

By clicking subscribe, you agree to receive news, promotions and offers by email from Top Gear and BBC Studios. Your information will be used in accordance with our privacy policy.

BBC TopGear

Try BBC Top Gear Magazine

subscribe